Langhe jefa Kwararre Ayyukan allurar rigakafi Don kewayon kewayon thermoplastics da thermosets. Mun haɗu da kayan aiki mai sauri tare da daidaitaccen abu don samar da ɓangarorin ƙara da suka sadu da su da buƙatun bukatun.
Sassan da abubuwan da aka gyara
Digirin allurar rigakafi sojojin filastik a cikin karfe mold a ƙarƙashin matsin lamba. Lokacin da kayan sanyi da ƙarfi, Injin yana buɗewa da fitar da wani ɓangaren da aka gama. Wannan hanyar ta dace da kitsen geometries da manyan samarwa.
Sabis na allurar rigakafi
| Misali | Gwadawa |
|---|---|
| Clamping karfi | 50-2,000 tan |
| Shot nauyi | 10 G - 2,500 g |
| Shirya | 800-2,200 mashaya |
| Mold cavities | Single zuwa Multi-rassi- |
| Lokacin sake zagayawa | 10-60 seconds |
| Zaɓuɓɓukan Abinci | Abin da, PC, Pp, Nail, Yi shelar alkjjada, Tpu, PPS |
| Amfani | Amfana |
|---|---|
| Babban kayan aiki | Dubunnan sassa a kowace rana |
| Ingancin inganci | Maimaitawa da gamawa |
| Hadaddun geometry | Ganyen bakin ciki, Lura, abun ciki |
| Low scrap | Karancin sharar gida |
| Mai sarrafa kansa | Ya haɗu da roli da taro |
Abubuwan allurar rigakafi sun bayyana a ciki:
| Tattalin arziki | Misalai |
|---|---|
| Mayarwa | Bangarori na kayan aiki, mai haɗawa, shirye-shiryen bidiyo |
| Mai amfani da kayan lantarki | Haye, mabaye, mai haɗawa |
| Na likita | Abubuwan haɗin sirinji, Binciken Casings |
| Iyali | Kayan aiki, zagaye |
| Factor | Allurar gyara | Cnc Mactining | 3D bugu |
|---|---|---|---|
| Kudin naúrar | Mafi ƙasƙanci a manyan kundin | Mafi girma kowane bangare | High don samarwa |
| Lokacin jagoranci | 4-8 makonni | 1-2 makonni | 1-7 kwana |
| Bangare mai rikitarwa | Sosai hadaddun | Limited ta hanyar gyarawa | Cikakken bayani |
| Girma | 1,000+ kwuya ta | 1-100 PCs | 1-100 PCs |
| Kayan sharar gida | M | Matsakaici zuwa babba | Babu wanda ya rage |
Kasuwancin Service Service
Muna aiwatar da iko mai tsauri a kowane mataki:
Abubuwan allurar rigakafi
Shirya don taƙaita kayan aikin filastik? Hulɗa Langhe jefa Don magana mai kyau na gyara, Bayani DFM, da goyon baya na Turkiyya.
Imel: [email protected]
Waya: +86-188 3893 9163
Muna tallafawa yana gudana daga 500 zuwa miliyoyin sassa a kowace shekara.
Mun mold mold: Abin da, PC, Nail, Yi shelar alkjjada, Tpu, PPS, da kuma ƙari.
Standardadden mold na gyara shine makonni 4-8; Zaɓuɓɓukan da aka yi amfani da su.
Filastik inkis allurar m sabis na al'ada sassa
