Tšebeletso ea ho khaola Laser

Langhe Casting Filvers setsebi litšebeletso tsa laser ho itšeha bakeng sa mefuta e mengata ea litšepe le lisebelisoa tsa indasteri. Thepa ea rona e nepahetseng le litsebi tse nang le boiphihlelo li netefatsa ho seha ho hloekile, nako e potlakileng ea ho fetoha, le ho pheta-pheta ho ikhethang bakeng sa prototyping le tlhahiso e phahameng haholo.

Laser Cutting ke Eng?

Ho itšeha ka laser ha ho kopane, mokhoa o phahameng oa ho etsa masela o sebelisang lebone la laser le tsepamisitsoeng ho khaola thepa. Theknoloji ena ea fetoha mouoane, e qhibiliha, kapa o chesa thepa e tobisitsoeng ka ho nepahala ho feteletseng, ho etsa hore dibopeho tse rarahaneng le ho mamellana ka thata ntle le ho roaloa ha sesebediswa kapa ho senyeha.

fiber-laser-seha-tšepe

Kamoo Laser Cutting Works

1. Ho sebelisoa faele ea CAD ho hlahisa mokhoa o sehiloeng.
2. Mochine o shebana le lebone la laser le nang le matla a phahameng holim'a thepa.
3. Lintho tse bonahalang lia qhibiliha kapa lia fetoha mouoane tseleng ea laser.
4. Thusa likhase tse kang naetrojene kapa oksijene ho tlosa lintho tse qhibilihileng.
5. Karolo e pholile ebe e hlahlojoa ka mor'a ho khaola.

Melemo ea Tšebeletso ea Langhe Casting's Laser Cutting

Lisebelisoa tseo re li khaolang ka Laser

Langhe Casting e fana ka litšebeletso tsa ho itšeha ka laser bakeng sa mefuta e mengata ea lisebelisoa, ho kenyelletsa:

• Ts'epe e sa beng le mabali (ho fihlela ho 12 mm)
• Carbon Sense (ho fihlela ho 20 mm)
• Aluminium (ho fihlela ho 8mm)
• Koporo le koporo (botenya bo fokolang)
• Acrylic le Polycarbonate Sheets
• Liphanele tse kopantsoeng (E.g., ACM)

Likopo tse Tloaelehileng

Re sebeletsa mafapha a fapaneng ka lits'ebeletso tse tšepahalang tsa ho itšeha ka laser. Lisebelisoa tse tloaelehileng li kenyelletsa:

Laser Cutting vs. Waterjet vs. Plasma

Ka tlase ke papiso e potlakileng ea ho itšeha ka laser le mekhoa e meng e tloaelehileng ea ho itšeha:

Matla a rona a ho itšeha ka Laser

• Boholo ba leqephe la max: 3000limilimithara x 1500mm
• Boemo bo Nepahetseng: ± 0.05 limilimithara
• Ho Phethahala: ± 0.03 limilimithara
• Mefuta e Amoheletsoeng: DXF, Dwg, Mohato, IGES
• Litšebeletso tsa Boikhethelo: Ho khumama, welding, phofo ea phofo

Tšepe & ho itšeha ka laser ea polasetiki

Hobaneng u khetha casting ea Langhe?

Langhe Casting e tlisa theknoloji e phahameng le tsebo ea indasteri morerong o mong le o mong oa ho itšeha ka laser:

• Mechini e tsoetseng pele ea fiber laser
• Potlako ea quote le linako tsa ho fana
• Mekhoa e tiisitsoeng ea ho laola boleng
• Ntlafatso ea karolo e ikhethileng le therisano ea DFM
• Tšehetso e feto-fetohang bakeng sa li-prototype ho hlahisa bongata

Laser Cutting Quality Tiisetso

Re netefatsa maemo a holimo mosebetsing o mong le o mong:

• Tlhahlobo ea boleng ba moeli
• Netefatso ea boholo bo nang le lisebelisoa tsa CMM
• Liteko tse bataletseng le tsa warpage
• Batch traceability le litokomane tsa bareki

Tšebeletso ea ho khaola Laser

Kopa Laser Cutting Quote

E hloka kapele le ka nepo litšebeletso tsa laser ho itšeha? Langhe Casting e se e loketse ho fana. Ikopanye le sehlopha sa rona sa boenjiniere bakeng sa litharollo tsa tloaelo, theko ea tlholisano, le tšehetso ea litsebi e lumellanang le litlhoko tsa morero oa hau.

Imeile: [email protected]
Mohala: +86-188 3893 9163

LIPOTSO TSE BOTSOANG HANGATA (Li-FAQ)