Langhe Casting e fana ka botshepehi Litšebeletso tsa tšepe tsa tšepe Bakeng sa lits'ebetso tse fapaneng tsa boikiane. Re sebelisa mechini e tsoetseng pele ea CNC Press Brake ho netefatsa li-angles tse nepahetseng, ho mamella, le karolo ea boleng bo fetolang ho feta tlhahiso.
Mehala ea tšepe ke ts'ebetso ea ho etsa e sebelisang matla a hoetla ho fetola jiometry ea eona. Ho sebelisa lithulusi tse kang ho tobetsa mariki le lirolara, matlapa a tšepe a kobehile ho ba libopeho tse lakatsehang ntle le ho senya matla a lintho tse bonahalang kapa botšepehi.
Precision Sheet Metal Kona Service Service
| Bokhoni | TLHOKOMELISO |
|---|---|
| Bolelele ba ho Kobela Max | Ho fihlela 3000 mm |
| Botenya ba Lintho | 0.5 mm - 12 mm |
| Ho Nepaha ha Koba | ± 0,2 mm |
| Angle Precision | ±1° |
| Lisebelisoa tse tšehetsoeng | Tšepe, Aluminium, Ts'epe e sa beng le mabali, Koporo, Brass |
Tšebeletso ea ho Koba ka Metal
| Monyetla | Tlhaloso |
|---|---|
| Taolo e nepahetseng | Li-angles le litekanyo tse nepahetseng bakeng sa likopano tse tiileng |
| Chelete e sebetsang | Ha ho hlokahale theko e boima e shoa ka nako e khutšoanyane |
| Ho Phethahala | Liphetho tse tsitsitseng tlhahisong ea lihlopha |
| Moqapi oa Fetola | E amohela liprofaele le libopeho tse rarahaneng |
| Ho fetohela ka potlako | Seaparo se potlakileng le ho sebetsa bakeng sa merero e potlakileng |
Langhe Castting e tšehelitse likepe tse fapaneng ka lits'ebeletso tse nepahetseng tsa tšepe tse nepahetseng:
| Indasteri | Lihlahisoa tse tloaelehileng |
|---|---|
| Likoloi | Mabokose, Chassiss Panels, ho felloa ke matla |
| Lisebelisoa tsa motlakase | Libaka tse ling, Backplanes, Rack e sokolla |
| Kaho | Lifora tsa tšepe, Ts'ehetso, Mokhabiso oa Mokhabiso |
| Thepa ea ka tlung | Maoto, Baahi ba Tšehetso, Metsi a Armrest |
| Hvac | Ducwork, flanges, Likopano tsa tšepe tsa tšepe |
| Tšobotsi | Mehala ea tšepe | Welding | Ho tsitsipana |
|---|---|---|---|
| Phetoho ea lintho tse bonahalang | Ntle le ho qhibiliha | Lihlahisoa tsa fuse | E thehiloe tlasa khatello |
| Litšenyehelo tsa Tool | Tlase | Tlase ho mahareng | Phahameng bakeng sa des |
| Ho rarahana | E leka-lekaneng ho ea holimo | Phahameng (ka manonyeletso) | E lekantsoe ke sebopeho sa Die |
| Nako ea ho qala | Haufinyane | Metsi a mahareng | Nako e telele (Bakeng sa sesebelisoa se secha) |
| Lead time | Ka potlako | E tsitsitse | Nako e telele |
Langhe Capting e latela matla a boleng bo holimo ho pholletsa le ts'ebetso ea ho akheha:
Lifotiso tsa inthaneteng tsa marang-rang tsa tšepe tsa tšepe
Hloka tloaelo Litšebeletso tsa tšepe tsa tšepe Bakeng sa morero oa hau o latelang? Ikopanye le Langhe Casting ho fumana tšehetso ea setsebi, Liphetho tse Nepaha, le linako tse potlakileng tsa lead. Sehlopha sa rona se ikemiselitse ho thusa ka ntho e 'ngoe le e' ngoe ho tloha ho li-prototype ho isa ho liodara tse kholo.
Imeile: [email protected]
Mohala: +86-XXX-XXXX-XXXX
Webosaete: www.langhecasting.com
Re ka inama ho fihlela 12 mm letlapa la tshepe e teteaneng, ho ipapisitsoe le thepa le sekhutlo se hlokahalang.
Ho joalo, li-brake tsa rona tsa CNC tsa khatiso le basebetsi ba nang le tsebo ba khona ho sebetsana le mekoloko e mengata ea mehato le libopeho tse tloaelehileng.
Ehlile. Re fana ka phofo ea phofo, welding, le kopano ka kopo.
