Langhe jefa kwararru a cikin madaidaicin Ayyukan ƙarfe na matsakaici zuwa manyan samarwa. Mun hada fasahar cigaba da ya ci gaba da sarrafa tsari don isar da sassa, m amincices, da masana'antu mai inganci.
Daidai-subed-sassa
M karfe. Wani lebur wanda ya shiga mutu, kuma sunyi amfani da wadatar da karfi, tanadi ko zana kayan cikin tsarinta na ƙarshe. Wannan hanyar ta dace da babban girma-girma da hadaddun geometries.
ayyukan karfe-bel
| Iyawa | Gwadawa |
|---|---|
| Latsa Tonnage | 30 - 800 tan |
| Girman Max | 2000 × 1000 mm |
| Kewayon farin ciki | 0.3 - 6.0 mm |
| Haƙuri | ± 0.1 mm |
| Saurin zagaye | Har zuwa 120 Strockes / Min |
Mashin M Karfe a China
| Amfani | Amfana |
|---|---|
| Babban kayan aiki | Mafi girman fitarwa don manyan umarni |
| Maimaitawa | Tabbatar da ingancin unƙasa a tsakanin dubunnan sassa |
| Cikakken bayani | Hatimi mai kyau fasali da kusurwa mai ƙarfi a cikin wani bugawa |
| Minimal sharar gida | Inganta kayan amfani da ketare da scrap maida ido |
Langhe tana buga hatimi na tarin tarin:
| Abu | Yankunan kauri |
|---|---|
| Sanyi-birge karfe | 0.3 - 4 mm |
| Bakin karfe | 0.5 - 6 mm |
| Aluminum | 0.5 - 5 mm |
| Jan ƙarfe & Farin ƙarfe | 0.3 - 3 mm |
Muna bauta wa:
| Tattalin arziki | Sassan da aka sace |
|---|---|
| Mayarwa | Bridts brackets, Heal Hereld, shirye-shiryen bidiyo |
| Kayan lantarki | Garkuwa gwangwani, mai haɗawa, Farantin chassi |
| Kayan aiki | Bangarorin sarrafawa, haye, datsa guda |
| Na likita | Abubuwan kayan aiki, brackets |
| Shiga jerin gwano | Mafi kyau ga | Girma | Kudin kowane bangare |
|---|---|---|---|
| Sawun karfe | Zanen gado, babban girma | 1,000+ kwuya ta | M |
| Cnc Mactining | Hadaddun geometry, karancin girma | 1-500 PCs | M |
| Sansari | Sassan lokacin farin ciki, tsakiyar girma | 100-5,000 PCs | Matsakaici |
Muna isar da inganci ta hanyar:
Ayyukan Albarkatun M Karfe
Muna kiyaye Iso-lamunin Qaya Ta hanyar:
ayyukan karfe-bel
Shirye don dogaro, babban girma Ayyukan ƙarfe? Hulɗa Langhe jefa Yau don saurin ambaton, goyon bayan sana'a, da magungunan sarrafa kai.
Imel: [email protected]
Waya: +86-188 3893 9163
Ci gaban ya mutu ya mutu da yawa a cikin kayan aiki ɗaya kamar yadda tsiri ci gaba ta hanyar tashoshi.
I. Fuffukanmu suna ɗaukar maki mai ƙarfi 800 MPA tare da ƙirar Die ta dace.
Kayan aiki yana ɗaukar makonni 4-6; samar da lokacin jagorar jagoranta ya dogara da girma amma sau da yawa yana farawa a cikin mako guda bayan gwaji.
